food serving trolley SPA/EB-4 heatable • 4 basins

Execution: • Devices completely made of high quality stainless steel. Robust construction of square tubular frame 25x25 mm according to DIN 18867-7. Upper plate folded on all sides. Seamless thermoformed, individually heatable holding basins with large, easy-to-clean radii and embossing for max. Water level filling, for holding GN1 / 1 containers and their subdivisions. Pelvic floor smooth with slope to drain. The maximum container depth is 200 mm. Food dispensing trolley suitable for connection to energy optimization systems. Wet and dry heating of the pools possible. Pool with high quality special insulation thermally insulated on all sides. Insulating material non-flammable, chemically neutral, moisture-resistant and completely harmless to health. Heating by means of durable tubular heating elements made of stainless steel, alternatively with foil heating. Easy cleaning of the sink by drain down. Quick recognition of the opening or closing state of the drain taps also from a distance by special shape and optical marking. Due to the open substructure, direct emptying into on-site floor drainage channels or floor drains is possible. No transfer to other containers is necessary. User-friendly operation by means of an ergonomically designed knob stepless thermostatic control of the pool temperature between 30 and 95 ° C 4 performance ranges characterized by marks visible on the gags from afar, easy handling. Exact and permanent assignment of pelvis and switches by marking with embossed, raised numbers. Easy to clean. Per device 1 On / Off switch, with integrated display function "Device ready", operating status easily recognizable from a distance. Connection in the rear area by a flexible, dimensionally stable spiral cable with angle plug. The cable does not have to be routed around the whole device and therefore does not interfere with the work. By using the shortest distance between the power supply and the connection point, contact between the cable and the floor is avoided. Cable extendable to 1.80 m if required. Plug holder mounted behind the device under the device. Radiator and electrical components easily accessible and easily dismantled in case of service. IPX5 water jet protection in accordance with EN 60529. Device side walls and edges as well as operating and display elements protected against damage by four deflector rollers mounted directly above the rollers. Deflector rollers made of elastic and impact-resistant plastic, quickly replaceable if necessary by loosening the rollers. Two ergonomically designed push handles with integrated edge protect the SPA / EB-1 to SPA / EB-4 against injuries to the hands. The devices with long-side operation have above the gag a plastic collision protection with integrated recessed grip for easy movement of the devices in the area of distribution counters. Corrosion-resistant and maintenance-free plastic rollers according to DIN 18867-8. Housing and wheel center made of impact-resistant plastic, tires made of thermoplastic rubber. High quality bearing by means of precision ball bearings with integrated thread guard. 4 swivel castors, 2 of them with total lock. Spigot made of stainless steel. Rolls quickly exchangeable if necessary. Wheel diameter 125 mm. Technical data: • Number of pools: 4 • Pool size: for GN 1 / 1-200 and their subdivisions • Capacity: for 80 people • Heating: stainless steel tubular heater • Connected load: 2.8 kW / 230 V / 1N AC / 50 Hz • Degree of protection: IPX 5 • Thermal insulation: special insulation • Temperature control: infinitely variable, each tank separately • Thermostat setting: 30 - 95 ° C • Chassis: 4 castors, 2 of them with brakes, Ø 125 mm • Load capacity: 220 kg • Net weight: 50.5 kg Dimensions: 1594 x 677 x H 900 mm