food trolley with plate well SPTW-2/EBF/ TEHCO heatable • 2 basins

Product information Trolleys in stable, self-supporting and hygienic construction made of high-quality stainless steel.Closed construction with all-round folded cover and all-round slosh edge. Above the cover, a 1/3 to 2/3 split hinged lid, which also fulfills its function when using GN containers with lids, and is equipped at both ends with one stainless steel handle per lid segment. The 1/3 segment can be folded down by 270 ° with a perforated plate that can be removed for cleaning and with a locking option in 180 ° position for portioning and providing plates or as a ladle tray. The 2/3-segment 270 ° hinged as storage for GN cover with horizontal strut of stainless steel wire Ø 8 mm and gutter for condensate.In the cover seamlessly and seamlessly welded and fully insulated basins, wet heatable, with deep-drawn level marking. Each basin for holding a container GN 1 / 1-200 or smaller. By special inclination of the soil residue-free emptying of the basin over separate drain and from outside adjustable ball cock 1/2 ?. Drain cock protected against accidental opening, each setting easily recognizable even from a distance. In addition, a static heated plate stacker with cover made of polycarbonate and a recessed in the cover cup tray GN 1 / 3-150.Unterhalb the pool in completely sealed welded base two heated cabinet compartments with deep-drawn pads for storing food in GN containers or baskets. In addition, by inserting a cold storage plate use as a refrigerated compartment is possible. Below the ladle rack another, neutral cupboard compartment with a removable shelf. Double-walled insulated and sound-insulated double doors with a securely closing snap lock and surrounding frame gasket together with high-quality insulation and the thermal separation between the compartments and the basins ensure minimized temperature losses. Heating the basins with energy-efficient foil heaters with optimal heat conduction. Reduction of the heating time for a water temperature of 90 ° C to max. 30 minutes with a radiation heat at the outer housing of approx. 35 ° C. Heating of the cabinet compartments as well as the plate tube by stainless steel tubular heating element. Heaters can be operated from the front via an on / off switch with integrated indicator light and separately thermostatically controlled by stepless and ergonomically shaped temperature controllers, which are easily recognizable even from a distance, with temperature limiter in accordance with VDE. Power supply via dimensionally stable and retractable spiral cable with angled plug and dummy socket in the control panel. At the front, a push handle made of ergonomically shaped round Ø 25 mm stainless steel tube. Four massive bumpers made of polymer on the lower housing corners and an additional bumper with integrated drip edge above the doors serve as collision protection, protect in these areas both the device all around and on-site walls from damage. Car on 4 swivel castors, including 2 with total immobilizers, and a centrally mounted fixed castor, fastened with multiple bolted mounting plates. The Hupfer food transport trolley SPTW 2EBH 2WF TEHCO offers through the use of foil heaters in the area of the basins with the same power a significant reduction of the heating times and the heat radiation through the outer casing and thus in the long run a considerable energy cost savings. Separate down to the floor board running processes ensure trouble-free water drainage from the pool. The cabinet compartments have up to a 33% larger capacity (when fitted with 65 mm deep GN containers). The snap locks of the double doors show, even with robust treatment, an absolutely safe closing behavior. Technical data: Usable size: Ø 190 to 260 mm Dish size, 1/1 GN Capacity: 2 x GN 1 / 1-200 + 8 x GN 1 / 1-65 Pitch: 75 mm Type of insertion: lengthwise Cymbals: 2 Cabinet heaters: 2 Internal dimensions Cabinet compartment heated: 330 x 540 x 370 mm Cupboard compartment neutral: 1 internal compartment Cupboard compartment neutral: 330 x 200 x 370 mm Thermoelectric supply: Basin: Foil / fan + tube: Rohrheizk. Temperature range: Basin: 30-95 ° C / Fan + tube: 30-80 ° C Payload: 178 kg Roller equipment: 4 swivel castors, 2 m.Feststeller, 1Bockr Ø160 Main construction: closed, double-walled, two-piece Power: 2800 W Connection voltage: 230V AC Rated current: 12 A Protection class: IPX4 Frequency: 50/60 Hz Weight: 155 kg Width: 1324 mm Depth: 673 mm Height: 1118 mm