• Filter type B (standard): not intended for use according to guideline VDI 2052 on thermal devices
• intended for the removal of fumes in e.g. dishwashing areas, food distribution or hot distribution
• The supply of supply air ensures negative pressure and results in a higher suction effect and fat removal
• made of stainless, ferritic steel
• welded corners on the hood body
• folded edges and deburred cut edges
• internal, circumferential grease/condensate collection channel with drain valve
• incl. LED lighting (230V), IP54
• Delivered in sections for lengths >2800 mm
• Interior construction with an exhaust air chamber and a storage space with removable filters
• Flame retardant filter easily removable and dishwasher safe
• energy-saving
• low-maintenance
• Installation by a specialist and professional acceptance is recommended

Execution:

Induction hoods are efficient and energy-saving because this technology draws fresh supply air directly into the hood's storage space. The suction effect captures rising vapors more efficiently and transports them more quickly to the filter. The temperature difference between the fresh air and the vapors causes condensation to occur in the separator rather than in the exhaust duct. Grease separation is enhanced while simultaneously saving energy! Condensate and grease are collected in the internal channel and can be easily and hygienically drained using the ball valve on the side. The induction wall hood from the "Basic Line" series is made of high-quality stainless steel and solidly welded at the corners. All edges are folded, and the cut edges are deburred for a smooth, easy-to-clean surface. The filter is, of course, dishwasher-safe. The wall-mounted hood is equipped with a type B flame-retardant filter and is therefore only suitable for kitchen areas where no thermal cooking appliances with a total output of > 25 kW are used, such as in the food service area or the dishwashing area. When ordering, please ensure the hood has the correct overhang to ensure reliable filtering of your work area. For all applications, we supply this hood in depths from 900 mm to 1400 mm and in widths from 1200 mm to 5000 mm. For easier installation, hoods with a width of 2900 mm and above are delivered in sections. We also offer a large selection of wall and ceiling hoods with an LC2 type A flame-retardant filter! Please note the installation instructions!