clearing trolley ARW 10x6/2 | 2 shelves L 1095 mm B 695 mm H 1028 mm

Design: • Number of shelves: 2 • Outer dimensions in mm: 1000 x 600 mm • Surface loading per shelf: 40 kg • Usable height between the shelves in mm: 591 mm • Height of the upper shelf in mm: 853 mm • Chassis: 4 castors, of which 2 with total lock, Ø 125 mm • Total load capacity: 80 kg • Net weight: 21 kg • Clearing trolley, made entirely of high-quality stainless steel • Number of shelves: 2 • Dimensions in mm: 1000 x 600 mm • Surface load per board: 40 kg • Usable height between the ribs in mm: 591 mm • Height of the top shelf in mm: 853 mm • Chassis: 4 castors, 2 of them with total lock, Ø 125 mm • Total load capacity: 80 kg • Net weight: 21 kg • Carriage made entirely of high-quality stainless steel • Robust construction consisting of two Ø 25 mm round tube push-bars, welded in between Deep-drawn shelves with round, raised profile edge • Storage surfaces with large, easy-to-clean radii, lowered by approx. 10 mm from the edge of the profile. • Shelves 35 mm bevelled on all sides, with a flat safety envelope inside and sound-absorbing lining. • The upper shelf is bordered on three sides by both front sides and one long side by an apron. • The upper edge of the apron is 90 mm above the surge edge and 100 mm above the surface of the boat. This ensures that almost the entire board can be used for parking various items and even with full load and transport on uneven ground light parts and small parts are effectively protected from falling. The apron is made of stable 1.5 mm thick stainless steel plates and is firmly connected to the surge edge. • Trolley protected from damage by four deflector rollers mounted directly above the rollers. • Deflector rollers made of elastic and impact-resistant plastic, quickly replaceable if necessary by loosening the rollers. • Corrosion-protected and maintenance-free rollers. • housing made of galvanized-chromated steel, • wheel body made of impact-resistant, acid and grease-resistant plastic, tires made of thermoplastic rubber. High-quality storage by means of plain bearings. • 4 castors, 2 of them with total lock, Ø 125 mm. • Rollers can be exchanged without problem if necessary, • Spigot mounting. Dimensions: • External dimensions W x D x H in mm: 1100 x 700 x 1030 mm