• Filter type B (standard): not intended for use according to guideline VDI 2052 on thermal devices
• intended for the removal of fumes in e.g. dishwashing areas, food distribution or hot distribution
• The supply of supply air ensures negative pressure and results in a higher suction effect and fat removal
• made of stainless, ferritic steel
• welded corners on the hood body
• folded edges and deburred cut edges
• internal, circumferential grease/condensate collection channel with drain valve
• incl. LED lighting (230V), IP54
• Delivered in sections for lengths >2800 mm
• Internal construction with one exhaust air chamber and two storage compartments with two rows of removable filters
• Flame retardant filter easily removable and dishwasher safe
• energy-saving
• low-maintenance
• Delivery without filter possible
• Installation by a specialist and professional acceptance is recommended

Execution:

Induction hoods are efficient and energy-saving because this technology directs fresh supply air directly into the hood's storage space. The resulting suction effect captures the rising vapors more efficiently and guides them more quickly to the filter. Due to the temperature difference between the fresh air and the vapors, condensation takes place in the separator and not in the exhaust air duct. Grease separation is increased while simultaneously saving energy! Condensate and grease are collected in the internal channels and can be easily and hygienically drained using the ball valves on the side. The induction ceiling hood from the "Basic Line" series is made of high-quality stainless steel and solidly welded at the corners. All edges are folded, and the cut edges have been deburred for a smooth, easy-to-clean surface. The filter is, of course, dishwasher-safe. The ceiling hood is equipped with a type B flame protection filter and is therefore only suitable for kitchen areas where no thermal cooking appliances with a total output of > 25 kW are used, such as in the food service area or the dishwashing area. When ordering, please ensure the hood has the correct overhang to ensure your work area is reliably filtered. For all applications, we supply this hood in depths from 1800 mm to 2400 mm and in widths from 1200 mm to 5000 mm. For easier installation, hoods with a width of 2900 mm and above are delivered in sections. We also offer a large selection of Stalgast wall and ceiling hoods with an LC2 type A flame protection filter! Please note the installation instructions!